2N 5401
- Transistor
- Max Transition Frequency 100-300MHZ
- Max Collector Current 600mA
Reference:
This device is used to produce high frequency sounds and makes the sound more clear and authentic for the listener.
Used in tweeter speakers.
50 Watts.
Uses 34.4 MM coil.
This device is used to produce high frequency sounds and makes the sound more clear and authentic for the listener.
Modern Digital Multimeter UNI-T brand.
A multimeter is an electronic device which is commonly used to measure the voltage , current and resistance.
Can be termed as Multi-tester or a Volt/Ohm Meter.
Tests continuity of two points in an Electric circuit.
Uses 100MM coil (Available on site search >electonics>coils )
18 inches 1200 Watts speaker.
A speaker is used to generate sound and radiate it into a room or open air.
Are connected to electrical sound devices to amplify the frequency of the sound depending on the watts of the speaker.
A speaker is used to generate sound and radiate it into a room or open air.
Are connected to electrical sound devices to amplify the frequency of the sound depending on the watts of the speaker.
This is the main or port of an amplifier which controls and performs the function of Amplifiers.
2 RCA Female input Mono Output 6.3 MM.
RCA means (Radio Corporation of America).
An electrical connector used to carry audio or video signals.
PCB - Printed Circuit Board
These are Electrical Connectors which are used to connect Speakers to Amplifiers.
Uses 75.5MM coil (Available on site search >electonics>coils )
15 inches 900 Watts speaker.
A speaker is used to generate sound and radiate it into a room or open air.
Are connected to electrical sound devices to amplify the frequency of the sound depending on the watts of the speaker.
A speaker is used to generate sound and radiate it into a room or open air.
Are connected to electrical sound devices to amplify the frequency of the sound depending on the watts of the speaker.
Uses 125 MM Coil (Available on site search >electronics>coils )
18 inches speaker.
A speaker is used to generate sound and radiate it into a room or open air.
Are connected to electrical sound devices to amplify the frequency of the sound depending on the watts of the speaker.
A speaker is used to generate sound and radiate it into a room or open air.
Are connected to electrical sound devices to amplify the frequency of the sound depending on the watts of the speaker.
Also known as Hot Melt Adhessives [HMA].
Works with solid cylindrical sticks of different diameters as per applied to the hot glue gun usage.
Glue is very hot can burn and cause blisters so care is needed whilst handling the glue gun.
Kip away from children.
Long shelf life. rapid drying, creates tamper-resistant seals and minimal environmental precautions needed.